Slide Mounting Media
Vector Laboratories VECTASHIELD Vibrance Antifade Mounting Medium with DAPI 10 ml
VECTASHIELD Vibrance Antifade Mounting Medium with DAPI offers superior protection against photobleaching during fluorescence-based imaging of cells and tissue sections. It is supplied as an aqueous, ready-to-use formulation with a blue fluorescent counterstain. No sealing is required, and sections may be viewed after only one hour. There is minimal bubble formation, retraction or background development over extended room temperature slide storage. It works well with dyes and other fluors across the spectrum, including those with far-red fluorescence. The refractive index after curing is 1.47. 12-month expiration.
Leica Biosystems MICROMOUNT MOUNTING MEDIA 1PT
Micromount is a rapid-drying, xylene-based mounting medium. An antioxidant is added to inhibit stain fading and prevent the formation of annual rings. Micromount sets up quickly, allowing slide preparations to be handled immediately after mounting. Micromount is soluble in xylene, toluene, and most xylene substitutes.
Abcam Mounting Medium With DAPI - Aqueous, Fluoroshield
Mounting Medium With DAPI - Aqueous, Fluoroshield
The product is subject to the following: Abcam Restricted Use Statement
Abcam PAP pen, 1UNIT
Hydrophobic barrier PAP pen (pH 5.8) is a special marking pen that provides a thin film-like green-tinged barrier when a circle is drawn gently around a specimen on a slide. - Cited in over 15 publications - Good for approximately 500 uses - Contains 35% toluene, 15% solvent naphtha, 15% xylene - Insoluble in alcohol and acetone
The product is subject to the following: Abcam Restricted Use Statement
Structure Probe Inc SILVER CONDUCTIVE PAINT 1 OZ
SPI Conductive Silver Paint,1 Troy oz.(31.1g),Use : for affixing samples to specimen mounts,or for attaching specimens in the microprobe and tilting stages of transmission electron microscopes (TEMs),High percent of silver solids
Leica Biosystems Leica CV Ultra Mounting Media, 1 x 250 mL
Leica CV Ultra Mounting Media is a non-solvent coverslipping reagent formulated to replace xylene and toluene in histology and cytology workflows. It is compatible with manual and robotic coverslippers and designed for flexible mounting without hazardous organic solvents.
- Replaces xylene and toluene and conventional mounting media.
- Compatible with common robotic coverslippers and manual coverslipping procedures.
- Does not contain dangerous organic solvents.
- Flexible use with xylene- and toluene-based workflows.
- Supplied in a 1 x 250 mL bottle.
Andwin Scientific MOUNTING MEDIA 16OZ
The Tissue-Tek Glas Mounting Medium is compatible to use with the Glas Coverslipper to maximize performance, generating clean, bubble-free slides. This product can be opened and put directly onto the mounting medium area of the coverslipper without the need of pouring.
Vector Laboratories VECTASHIELD Antifade Mounting Medium with Propidium Iodide (PI)
VECTASHIELD Antifade Mounting Medium with PI, prevents rapid photobleaching of fluorescent proteins and fluorescent dyes. PI is a reddish nuclear counterstain with a broad excitation range at around 530 nm and emission at about 615 nm. Features: Ideal refractive index (1.45)Ready-to-use - from the refrigerator to the benchtop, No warming necessary, Can be stored without sealing for long term analysis Non-hardening formulation
Vector Laboratories VectaMount Express Mounting Medium, 60 ml
VectaMount Express is a non-aqueous clearing and mounting medium enabling the rapid mounting of cell and tissue specimens following immunohistochemistry (IHC) staining. This novel formulation is engineered to enable mounting directly following staining, saving time by eliminating the need for extensive ethanol and clearing washes prior to coverslipping. Just stain your slides as per your usual workflow, briefly wash in isopropyl alcohol, and coverslip. Features: Non-aqueous clearing and mounting medium for IHC-stained slides. Eliminates the need for extensive ethanol washes and solvent-based clearing agents (e.g., xylene).Rapid drying formula for fast visualization of stained samples. Preserves staining for at least 18 months at room temperature.
Polysciences, Inc. Poly-Mount Xylene, 120 mL
Xylene based routine coverslipping medium for histology and cytology slides. This acrylic medium provides superior optical clarity. Poly-Mount Xylene is also recommended for automated coverslipping instruments that use glass coverslips. It contains an anti-fade agent to prevent fading and yellowing with long term storage. Dries quickly for viewing, storage, and filing.
![Buehler EpoxiCure 2 Resin, 64oz [1.9L]](https://assets.fishersci.com/TFS-Assets/CCG/product-images/OS-0011459EPOXICURE-2-RESIN-64OZ19L.JPEG-250.jpg)
Buehler EpoxiCure 2 Resin, 64oz [1.9L]
This item has a minimum qty of 2 per supplier requirements.
EpoxiCure 2 is a clear general purpose epoxy system with a 6 hr cure time. 64 oz
Leica Biosystems SPECTRA CV X1 MOUNTING MEDIUM
HistoCore SPECTRA CV X1 is a rapid drying, xylene based mounting media. An antioxidant is added to inhibit stain fading and prevent the formation of annual rings. It sets up quickly, allowing slide preparations to be handled immediately after mounting. SPECTRA X1 is soluble in xylene, toluene, and most xylene substitutes.This product is only available for use in conjunction with the HistoCore SPECTRA CV.
Biotium EVERBRITE HARDSET MOUNTING MED
EverBrite™ mounting medium is a revolutionary antifade mounting medium optimally formulated for preserving fluorescence of Biotium’s CF™ dyes and other fluorochromes. Unlike VectaShield®, EverBrite™ is compatible with cyanine-based fluorophores like Cy® dyes. EverBrite™ Hardset mounting medium hardens at room temperature completely in 24 hours. This facilitates handling of the slide and eliminates the need to secure the coverslips. EverBrite™ mounting medium provides a high level of protection from photobleaching over a wide range of fluorescence wavelengths. Mounted slides can be stored at 4°C for a year or longer. EverBrite™ Hardset Mounting Medium has a refractive index of 1.38 initially, which increases to 1.42 after 24 hours of curing, and 1.46 after four days of curing, after which it remains constant. 10 mL.